We have been developing and producing a series of sprayer and plastic products for customers' OEM or ODM since 1999. Currently we are working hard to make new products by promoting their superior quality for our customers all over the world.

Single Post

What should I do if there is a hole in the watering can

  • admin
  • 2020-11-28 16:07:31
  • 183

The watering can manufacturer is a very common container in our life, and we will inevitably have damage when it is used. If the watering can has a loophole, how should we fix it?

If the plastic bucket of the watering can has a small hole, it will be thrown away, which is too wasteful, but because it breaks, it will cause the pressure to lose its effect, and there is almost no way to use it. In fact, there are ways to remedy, if the hole is not large, you can choose adhesive adhesion. Of course, this method is limited to small hole holes. If it is found to be a large hole, the best way is to use a special plastic welding to make up, or you can find a suitable plastic welding to the leaking place.

In order to ensure the quality of its use, we should do its maintenance according to different use environments, in order to extend its service life.