We have been developing and producing a series of sprayer and plastic products for customers' OEM or ODM since 1999. Currently we are working hard to make new products by promoting their superior quality for our customers all over the world.

Single Post

Analyze the general knowledge of lotion pump heads

  • admin
  • 2020-12-01 13:03:35
  • 341

A. Distributors are divided into two types: bar mouth type and screw mouth type. From the perspective of function, they are also divided into spray, foundation cream, lotion pump, aerosol valve, and vacuum bottle.

B. The size of the pump head is determined by the caliber of the matching bottle body. The spray specifications are 12.5mm-24mm, and the water output is 0.1ml / time-0.2ml / time. It is generally used for packaging perfumes, gel water and other products. The length of the same takeover can be determined according to the height of the bottle body.

C. The range of the lotion pump head is 16ml to 38ml, and the water output is 0.28ml / time to 3.1ml / time. It is generally used for cream and washing products.

D. Special dispensers such as foam pump heads and hand-held spray heads. The foam pump head is a non-gas-filled hand pressure pump head, which does not require gas filling to generate foam. It can produce quantitative high-quality foam by just pressing lightly. . Usually equipped with a special bottle. Hand-held sprinklers are commonly used on products such as detergents.

E. Airless bottles are usually cylindrical, with specifications of 15ml-50ml, and individual 100ml. The overall capacity is small. It is based on the principle of atmospheric pressure, which can prevent cosmetics from causing pollution during use. The airless bottles have galvanized aluminum, plastic plating and colored Plastic, the price is more expensive than other general containers, ordinary ordering requirements are not high.

F, the composition of the distributor is more complicated, generally including: dust cover, hoe, stalk, gasket, piston, spring, valve, bottle cap, pump body, suction tube, valve ball (steel ball, glass ball). Bottle caps and dust caps can be colored, can be electroplated, and can be covered with anodized aluminum rings. Because a set of pump heads involves more molds, and the order quantity is large, the minimum order quantity is 10,000-20,000, and the delivery period is 15-20 days after the sample is confirmed. White and general-purpose models are often in stock.